10’ or 8’ Arise
Pop-Up Floor Display (curved)

PANEL SPECIFICATIONS:

• 10’ display has 4 panels side by side
• 8’ display has 3 panels side by side
• One panel = 26.75”w x 87.75”h and is covered with velcro-compatible fabric available in a variety of colors
• Both displays have a curved end cap at either end = 22”w x 87.75”h

For a typical flexible header spanning across the top of the display,
leave space at each end to allow for wrap:

For 10’ Flexible Header:
For 8’ Flexible Header:

For 10’ Backlit Header: (fits in a frame)		(Stay within 1” from top & bottom edges)
For 8’ Backlit Header: (fits in a frame)		(Stay within 1” from top & bottom edges)

Tip: For easier viewing of graphics while on display, work in the area above 30” from ground and between endcaps.

For MURALS:

• Any fabric panel can be replaced by a large inkjet graphic panel. Use the sizes above for your layout. For example: one or several images can span over a 3 panel spread, therefore the image layout will be = 88.3125”w x 89.75”h
• Any digital image used must be a minimum of 75ppi at 100% final size. (100ppi is preferable)

PODIUM CONVERSION: The 2 display carrying tubes convert into a podium. Most clients prefer a logo graphic for front. Front flat panel = 25.5”w x 40.5”h

10’ or 8’ Nomadic
Pop-Up Floor Display (curved)

PANEL SPECIFICATIONS:

• 10’ display has 4 panels side by side
• 8’ display has 3 panels side by side
• One panel = 29.4375”w x 89.75”h and is covered with velcro-compatible fabric available in a variety of colors
• Both displays have a curved end cap at either end = 15”w x 89.75”h

For a typical flexible header spanning across the top of the display,
leave space at each end to allow for wrap:

For 10’ Flexible Header:
For 8’ Flexible Header:

For 10’ Backlit Header: (fits in a frame)		(Stay within 1” from top & bottom edges)
For 8’ Backlit Header: (fits in a frame)		(Stay within 1” from top & bottom edges)

Tip: For easier viewing of graphics while on display, work in the area above 30” from ground and between endcaps.

For MURALS:

• Any fabric panel can be replaced by a large inkjet graphic panel. Use the sizes above for your layout. For example: one or several images can span over a 3 panel spread, therefore the image layout will be = 80.25”w x 87.75”h.
• Any digital image used must be a minimum of 75ppi at 100% final size. (100ppi is preferable)

PODIUM CONVERSION: The 2 display carrying tubes convert into a podium. Most clients prefer a logo graphic for front. Front & back panels = 32.5”w x 39”h Side panels = 20.5”w x 39”h

Backlit Advantage Panel

PANEL SPECIFICATIONS:

• The backlit Advantage Panel can replace any of the panels in Nomadic or Arise Pop-Up Floor Display (8’ or10’ configuration).
• Color matching of this backlit panel to the adjacent non-backlit panels cannot be guaranteed. This panel is more effective as a seperate design element.

NOMADIC panel size

• 34”w x 89.75”h (Total layout background size).
• Backlit image area: 30”w x 85.75”h.
  Keep type and other elements of the design within this area.

ARISE panel size

• 30.75”w x 87.75”h (Total layout background size).
• Backlit image area: 26.75”w x 83.75”h. Keep type and other elements of the design within this area.

Tip: For easier viewing of graphics while on display, work in the area above 30” from bottom.
Any digital image used must be a minimum of 75ppi at 100% final size. (100ppi is preferable)

PANEL SPECIFICATIONS:

• Each panel is covered with reversible velcro-compatible fabric available in a variety of colors
• Graphics can be sized to fit on each panel or across multiple panels that do not fold

FF-107 10-panel
Panel size: 23.5”w x 45”h
Backlit Framed Header
Panel size: 94”w x 12”h Image area: 93.375”w x 11.375”h