GRAPHIC SPECS 8 X 10 POP UP SPECS




6’ or 8’ Arise Table Top Pop-Up Display
(curved)

PANEL SPECIFICATIONS:

  • 8’ display has 3 panels side by side
  • 6’ display has 2 panels side by side
  • One panel = 26.75”w x 58.75”h and is covered with velcro-compatible fabric available in a variety of colors
  • Both displays have a curved end cap at either end = 22”w x 58.75”h

For a typical flexible header spanning across the top of the display,
leave space at each end to allow for wrap:

For 8’ Flexible Header:
For 6’ Flexible Header:

Tip: For easier viewing of graphics while on display, work in the area between endcaps.

For MURALS:

  • Any fabric panel can be replaced by a large inkjet graphic panel. Use the sizes above for your layout. For example: one or several images can span over a 2 panel spread, therefore the image layout will be = 53.5”w x 58.75”h.
  • Any digital image used must be a minimum of 75ppi at 100% final size. (100ppi is preferable)

 

5’ or 8’ Nomadic Table Top Pop-Up Display
(curved)

PANEL SPECIFICATIONS:

  • 8’ display has 3 panels side by side
  • 5’ display has 2 panels side by side
  • One panel = 29.4375”w x 59”h and is covered with velcro-compatible fabric available in a variety of colors
  • The display has a curved end cap at either end = 15”w x 59”

For a typical flexible header spanning across the top of the display,
leave space at each end to allow for wrap:

For 8’ Flexible Header:
For 5’ Flexible Header:

Tip: For easier viewing of graphics while on display, work in the area between endcaps.

For MURALS:

  • Any fabric panel can be replaced by a large inkjet graphic panel. Use the sizes above for your layout. For example: one or several images can span over a 2 panel spread, therefore the image layout will be = 58.75”w x 59”h.
  • Any digital image used must be a minimum of 75ppi at 100% final size. (100ppi is preferable)

 

Contour
Table Top Display
Hinged Panel System

 

PANEL SPECIFICATIONS:

  • Each panel is covered with velcro-compatible fabric available in a variety of colors
  • Graphics can be sized to fit edge to edge on each panel (see sizes below) or smaller

M3 or M4

  • Panel = 24”w x 36”h (each)
  • Header = 24”w x 12”h (each)

S3 or S4

  • Panel = 20”w x 30”h (each)
  • Header = 20”w x 8”h (each)

P3 or P2

  • Panel = 16”w x 20”h (each)
  • Header = 16”w x 5”h (each)


 

Classic Tabletop Portable Panel System

 

PANEL SPECIFICATIONS:

  • Each panel is covered with reversible velcro-compatible fabric available in a variety of colors
  • Graphics can be sized to fit on each panel or across multiple panels that do not fold

FT-05 3-panel
Panel size: 23.5”w x 45”h
Plexi Header
Panel size: 23.5”w x 10”h

FT-04 4-panel
Panel size: 23.5”w x 45”h
Top Mount Header
Panel size: 12”w x 47.5”h
Image area: 11.375”w x 46.875”h

FT-09 4-panel
Panel size: 23.5”w x 45”h Backlit Framed Header
Panel size: 70”w x 12”h
Image area: 69.375”w x 11.375”h
FT-06 6-panel
Panel size: 16”w x 45”h
Backlit Framed Header
Panel size: 45.5”w x 10”h
Image area: 44.875”w x 9.375”h

 


Home Custom ExhibitsPortablesGraphicsServices Buy a Display
Planning the Perfect ExhibitFAQ'sCompany ProfileContact Us
Employment Opportunities
Directions
DownloadsWhat's New



Nutmeg Exhibit Company
701 Marshall Phelps Road, Windsor, CT 06095
Phone: 1-800-899-8554 / Fax: 860-285-8913
Copyright © 2000 - 2002

Comments and Questions:
Nutmeg Exhibit Company